How to Clean Anova Nano: A Complete Guide

A good number of Anova Nano owners won’t think of cleaning them, until their devices encounter something bad. Like any home/kitchen appliance, Anova Nano requires cleanliness as well as regular maintenance. How can I clean Anova Nano, can I do so?

Yes, in fact doing it yourself is the talk of the day as many people try to fix some minor repair and maintenance project at home.  You don’t have to worry because our research is more of such assurance. We have answered the questions and provided extra content for your wellbeing.

Without wasting much time, the report will therefore entail the importance of cleaning your Anova Nano, how to clean it, and how often you should do so. You will benefit from contents like the best detergent and methods for cleaning Anova Nano. Lastly, we will equip you with handy tips ensuring your Anova Nano is always kept clean.

Is cleaning Anova Nano necessary?

Is cleaning Anova Nano necessary

Cleaning your kitchen appliance is always advisable for the longevity and wellbeing of the device. We have some circulators that opening them can be hectic, but Anova Nano is a breeze. You can easily dismantle it to access internal parts for easy cleaning.

Cleaning will therefore eliminate the accumulated components like fat, water, and food chunks in the circulator. While cleaning the device, put it in the dishwasher, if the manual says so.

More so, you should not utilize harmful chemicals as well as wrong cleaning methods. This appliance requires a special method of cleaning that will not destroy its internal components.

How to clean Anova Nano (complete guide)

how to clean anova nano

Since this is an immersion circulator, its design will help you to access most of the internal parts for easy cleaning. You will easily remove the external casing of your machine (where it stays in the water). The accessibility gives you a chance to carry out thorough cleanliness to the internal components of the machine.

Even though directly accessing the internal parts of the machine is not recommended, occasions like tragic water bath complications will force you to do so.

Methods of cleaning:

We have various cleaning procedures to use whenever your immersion circulator is dirty. The choice of a given method will be based on how dirty is the appliance you intend to clean. Have a look at these procedures;

Method 1: Vinegar bath

Method 1 Vinegar bath

Vinegar bath is the simplest and most reliable method for cleaning your Anova Nano circulator. Follow these steps to cleaning your appliance;

Step 1: Assembling necessary equipment

The first thing to do is to ensure you have required materials like a small pot, container or jar to accommodate the circulator. The container should not require a large amount of liquid. For instance, you can opt for any 2-quart pitcher to minimize the vinegar required. Other items you should ensure are distilled water and vinegar.

Step 2: Attach the Anova Nano in the jar

There is nothing much at this step since you are supposed to securely mount your circulator in the jar.

Step 3: Filling the container with a solution of water and vinegar.

Just pour in the mixture on the container and start the cleaning process.

Step 4: Run the circulator

Under this step, the cleaning process requires you to plug the device in the near power socket and then adjust the temperature to something like 140°F (60°C).Allow the circulator to run for a few minutes or an hour before turning it off.

Step 5: Empty the container

The next action will be to remove the vinegar water from the jar and then substitute it with clean water. There is no big deal under this step.

Step 6: Rerun the circulator

The essence of rerunning the circulator is to rinse the parts. However, this process should be only for a few minutes before you take the container away.

Step 7: Drying and storing the circulator

Lastly, you are required to dry off your circulator with the help of a soft piece of cloth. After doing so, there will be nothing left than storing it in a safe and dry place.

Method 2: Use of Calcium Lime Rust remover (CLR)

Method 2 Use of Calcium Lime Rust remover (CLR)

Here is another method that can be used to clean Anova Nano in case of dogged mineral buildups. This chemical is known for removing stubborn Calcium, Lime, and Rust stains (CLR) from different surfaces.

 However, this cleaning detergent is powerful and that’s why the instructions are clear on how to use it. Before using it, you should test it on a given surface; far from your circulator. I would advise you to use this method if the vinegar is out of reach or it fails to clean the circulator.

However, you can initiate the following steps to use the CLR method when cleaning your Anova Nano;

Step 1: Assembling necessary materials and equipment

The first step will be to ensure you have necessary materials and equipment like the container, small pot, or jar. The container should not require a large amount of CLR. Therefore, you should opt for a container that will minimize the CLR needed. Other items you require are CLR and distilled water.

Step 2: Attach the Anova Nano in the jar or container

There is nothing much to do in this step other than mounting the device on the container securely.

Step 3: Filling the container with a solution of water and CLR

Use something like 10% water and CLR solution to fill the jar. Again, be careful when interacting with the CLR chemical before triggering the cleaning process.

Step 4: Run the circulator

Under this step, you are supposed to plug the device in the nearby power socket and then start it. Give it enough time to run to thoroughly remove the dirt before rinsing.  The circulator should run for a few minutes or an hour before turning it off.

Step 5: Empty the jar

Remove the CLR water from the jar and then substitute it with clean water. Using the fresh water will completely rinse the container.

Step 6: Rerun the circulator

The essence of rerunning the circulator is to rinse the parts. Fill your container with clean water before rerunning the device for a few minutes. Repeating this step severally is necessary to completely rinsing the CLR from the Anova Nano. Take out the machine from the jar and advance to the next step.

Step 7: Drying and storing the circulator

Under this step, you are supposed to use a soft cloth to dry the machine. Store it in a safer and dry place after the drying process.

Tips for making your circulator clean

  • Subject it to regular cleanliness
  • Learn to immerse it in a vinegar and water solution once in a while based on the usage.
  • Too much cleaning the circular may destroy the sealing

FAQs:

  • How often should I clean my Anova Nano?

The period to clean your circulator depends on how frequent you use it. Therefore, you can do it monthly or weekly.

Final words

Hopefully, you now know the way forward when it comes to cleaning Anova Nano. However, prevention is always better than cure and that’s why we have equipped you with simple tips to keep your circulator off troubles.